Masterstream 1250 Nozzle Maintenance | Step-by-Step Lubrication Guide
3:10
Masterstream 1250 Nozzle Maintenance | Step-by-Step Lubrication Guide
243 views9 months ago
YouTubeTask Force Tips - Firefighter Equipment
How to service a TFT Metro 1 fixed gallonage combination nozzle #firefighter
0:38
How to service a TFT Metro 1 fixed gallonage combination nozzle #firefighter
1.9K views2 months ago
YouTubeTask Force Tips - Firefighter Equipment
🚒 Got a leaking nozzle? 46-year firefighting veteran Paul Neely shares a quick and easy fix to get your nozzle back in service without replacing parts. 🎥 In this instructional video, Paul demonstrates how to service a 19-year-old Quadrafog nozzle using just a 5/32” Allen wrench. Here’s how: - Remove the hose gasket and open the nozzle partway. - Stick your thumb into the back end of the valve, grab the Teflon seat, and pull it out. If it’s stuck, use a screwdriver to loosen it. - Inspect the s
1:28
🚒 Got a leaking nozzle? 46-year firefighting veteran Paul Neely shares a quick and easy fix to get your nozzle back in service without replacing parts. 🎥 In this instructional video, Paul demonstrates how to service a 19-year-old Quadrafog nozzle using just a 5/32” Allen wrench. Here’s how: - Remove the hose gasket and open the nozzle partway. - Stick your thumb into the back end of the valve, grab the Teflon seat, and pull it out. If it’s stuck, use a screwdriver to loosen it. - Inspect the s
28.4K viewsJan 10, 2025
FacebookTask Force Tips
Service Leaking Nozzle | Assembly Seat #firefighting #howto
1:28
Service Leaking Nozzle | Assembly Seat #firefighting #howto
4.8K viewsJan 10, 2025
YouTubeTask Force Tips - Firefighter Equipment
Service Spinning Teeth of Nozzle | Debris | Sluggish #firefighting
1:54
Service Spinning Teeth of Nozzle | Debris | Sluggish #firefighting
2.1K viewsJan 2, 2025
YouTubeTask Force Tips - Firefighter Equipment
How to Rebuild a Metro 1 Fire Nozzle | Fix Sliding Shaper, Leaks & Internal Wear
23:30
How to Rebuild a Metro 1 Fire Nozzle | Fix Sliding Shaper, Leaks & Internal Wear
161 views3 months ago
YouTubeTask Force Tips - Firefighter Equipment
How to Rebuild a Fire Nozzle Ball Shutoff Valve | Fix Leaks & Replace Valve Seats (TFT Service)
25:35
How to Rebuild a Fire Nozzle Ball Shutoff Valve | Fix Leaks & Replace Valve Seats (TFT Service)
412 views3 months ago
YouTubeTask Force Tips - Firefighter Equipment
2:28
How to Lubricate the M-R2000 Masterstream Nozzle | Firefighting Equipment Maintenance
295 views9 months ago
YouTubeTask Force Tips - Firefighter Equipment
2:31
Nozzle Techniques That Actually Work in Tight Hallways (Pt. 5/6)
381 views8 months ago
YouTubeTask Force Tips - Firefighter Equipment
0:39
How to Rebuild a Fire Nozzle Ball Shutoff Valve #firefighter
1.9K views2 months ago
YouTubeTask Force Tips - Firefighter Equipment
18:42
Switching to Low-Pressure Nozzles + Monitor Tactics with Amy West | Fully Involved Podcast (E5)
1.3K views8 months ago
YouTubeTask Force Tips - Firefighter Equipment
0:22
🚒🔧 Problem: You don’t want a pistol grip on your nozzle. What do you do? ❌ Drastic measures? Nope. ✅ The easy way? An Allen wrench. All it takes is removing one bolt and replacing it with a set screw—no stress, no saws needed. We love our friends at Valpo FD. The shirt is by no means a reference to them. 😆 #FirefighterTraining #Nozzle #FirefightingTools #TaskForceTips #Firefighting #ProbieLife #PistolGrip | Task Force Tips
370.5K viewsFeb 19, 2025
FacebookTask Force Tips
0:25
🚨 Real-World Test: Can a burned-up G-Force nozzle still flow? No hype. No filters. Just Jeff Goarley running a damaged nozzle through straight stream and fog tests 💪 This one isn't going back in service right now — but it still performs its duty. Because when you’re in deep, your gear needs to keep going. TFT Tough. 🎥 Tap to watch the test #TFTtough #firefightertools #gforcenozzle #firegear #firegroundtested #fireservice #TFT #realfiretraining | Task Force Tips
53.3K viewsMay 23, 2025
FacebookTask Force Tips
0:21
Debris at 100 PSI — what’s your nozzle doing with it? 💥 When junk comes flying down the line at full pressure, your gear better be ready. That’s why TFT uses stainless steel and Teflon in its nozzle internals — so debris bounces off, not through. Quick teardown, field-ready repair, and back in service fast so firefighters can get the job done quickly and safely. 👨‍🚒 👉 Find the right nozzle for your next job! Head to the comments. #firefighting | Task Force Tips
43.9K views9 months ago
FacebookTask Force Tips
0:43
💨🔥 Problem: Your Quadracup isn’t picking up foam. What’s wrong? 👀 Before blaming the nozzle, check this: ✅ Match the nozzle’s flow rating to the eductor’s flow rating (e.g., 60 GPM to 60 GPM). ✅ Make sure the nozzle is fully open. 💡 Follow these steps, and you’re back to making high-quality finished foam. #FirefighterTraining #FoamApplication #TaskForceTips #FireNozzle #Eductor #FireSuppression | Task Force Tips
10.4K viewsMar 18, 2025
FacebookTask Force Tips
25:08
2-Person Engine Fire Attack: Nozzle + Hallway Control | Connecticut | Fully Involved Ep. 8
9.1K views9 months ago
YouTubeTask Force Tips - Firefighter Equipment
0:42
Fighting Fire Exhausted? This Nozzle Trick Helps 🚒🔥 #firefighter #residential #training
3.9K views9 months ago
YouTubeTask Force Tips - Firefighter Equipment
0:16
What's a tip probies need to know about air entrainment? #firefighter #nozzle #flow
6K views8 months ago
YouTubeTask Force Tips - Firefighter Equipment
0:43
The Metro 1 nozzle gives firefighters fixed GPM at a known pressure: no fiddling, no second-guessing
1.3K views7 months ago
YouTubeTask Force Tips - Firefighter Equipment
0:17
VIT Valve Integral Tip™ nozzle: the functional smooth bore that lets you attach a combination nozzle
2K views7 months ago
YouTubeTask Force Tips - Firefighter Equipment
0:27
📶 Firefighter Tip No. 10: Get maximum flow from your Blitzfire with this simple tip adjustment on your nozzle! TFT's @tft.guy9 explains how you can boost your ground monitor operations. #firefighting #attack #supply #nozzle #monitor #taskforcetips
20K viewsJul 15, 2024
TikToktask_force_tips
0:31
The ThunderFog selectable flow rate nozzle lets you instantly bump flow #firefighter #firefighting
1.8K views6 months ago
YouTubeTask Force Tips - Firefighter Equipment
0:35
Vent a Room FAST Without Swapping Nozzles 🚒💨 #firefighter
5.7K views8 months ago
YouTubeTask Force Tips - Firefighter Equipment
0:38
Smoke and Heat in Your Face? Here's Why 🔥
8.5K views7 months ago
YouTubeTask Force Tips - Firefighter Equipment
0:53
Don't choose a low-pressure nozzle before watching this #firefighting
13.8K viewsNov 10, 2024
YouTubeTask Force Tips - Firefighter Equipment
0:23
🧊 It was so cold their nozzles FROZE on a call 🧊 #firefighter
4.9K views10 months ago
YouTubeTask Force Tips - Firefighter Equipment
9:12
Find in video from 08:18Flow Test and Repair Procedures
TFT Nozzle Lubrication Procedure
14.3K viewsOct 13, 2014
YouTubeTask Force Tips - Firefighter Equipment
0:34
Ultimatic® Nozzle | 1″ Booster Line & 1.5″ Handline Firefighting Solution
741 views11 months ago
YouTubeTask Force Tips - Firefighter Equipment
0:53
Wide Fog Pattern Demo: Nozzle Details Every Firefighter Should Know 🚒💦
4.4K viewsJan 10, 2025
YouTubeTask Force Tips - Firefighter Equipment
0:33
Firefighters! What should you use in this fire? #residential #nozzle #monitor #training
3.9K views9 months ago
YouTubeTask Force Tips - Firefighter Equipment
See more
Static thumbnail place holder